File: /var/www/vhost/disk-apps/magento.bikenow.co/vendor/hoa/console/Parser.php
<?php
/**
* Hoa
*
*
* @license
*
* New BSD License
*
* Copyright © 2007-2017, Hoa community. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the Hoa nor the names of its contributors may be
* used to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS AND CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
namespace Hoa\Console;
/**
* Class \Hoa\Console\Parser.
*
* This class parses a command line.
* See the parse() method to get more informations about command-line
* vocabulary, patterns, limitations, etc.
*
* @copyright Copyright © 2007-2017 Hoa community
* @license New BSD License
*/
class Parser
{
/**
* If long value is not enabled, -abc is equivalent to -a -b -c, else -abc
* is equivalent to --abc.
*
* @var \Hoa\Console\Parser
*/
protected $_longonly = false;
/**
* The parsed result in three categories : command, input, and switch.
*
* @var array
*/
protected $_parsed = null;
/**
* Parse a command.
* Some explanations :
* 1. Command :
* $ cmd is the command : cmd ;
* $ "cmd sub" is the command : cmd sub ;
* $ cmd\ sub is the command : cmd sub.
*
* 2. Short option :
* $ … -s is a short option ;
* $ … -abc is equivalent to -a -b -c if and only if $longonly is set
* to false, else (set to true) -abc is equivalent to --abc.
*
* 3. Long option :
* $ … --long is a long option ;
* $ … --lo-ng is a long option.
* $ etc.
*
* 4. Boolean switch or flag :
* $ … -s is a boolean switch, -s is set to true ;
* $ … --long is a boolean switch, --long is set to true ;
* $ … -s -s and --long --long
* are boolean switches, -s and --long are set to false ;
* $ … -aa are boolean switches, -a is set to false, if and only if
* the $longonly is set to false, else --aa is set to true.
*
* 5. Valued switch :
* x should be s, -long, abc etc.
* All the following examples are valued switches, where -x is set to the
* specified value.
* $ … -x=value : value ;
* $ … -x=va\ lue : va lue ;
* $ … -x="va lue" : va lue ;
* $ … -x="va l\"ue" : va l"ue ;
* $ … -x value : value ;
* $ … -x va\ lue : va lue ;
* $ … -x "value" : value ;
* $ … -x "va lue" : va lue ;
* $ … -x va\ l"ue : va l"ue ;
* $ … -x 'va "l"ue' : va "l"ue ;
* $ etc. (we did not written all cases, but the philosophy is here).
* Two type of quotes are supported : double quotes ("), and simple
* quotes (').
* We got very particulary cases :
* $ … -x=-value : -value ;
* $ … -x "-value" : -value ;
* $ … -x \-value : -value ;
* $ … -x -value : two switches, -x and -value are set to true ;
* $ … -x=-7 : -7, a negative number.
* And if we have more than one valued switch, the value is overwritted :
* $ … -x a -x b : b.
* Maybe, it should produce an array, like the special valued switch (see
* the point 6. please).
*
* 6. Special valued switch :
* Some valued switch can have a list, or an interval in value ;
* e.g. -x=a,b,c, or -x=1:7 etc.
* This class gives the value as it is, i.e. no manipulation or treatment
* is made.
* $ … -x=a,b,c : a,b,c (and no array('a', 'b', 'c')) ;
* $ etc.
* These manipulations should be made by the user no ? The
* self::parseSpecialValue() is written for that.
*
* 7. Input :
* The regular expression sets a value as much as possible to each
* switch (option). If a switch does not take a value (see the
* \Hoa\Console\GetOption::NO_ARGUMENT constant), the value will be
* transfered to the input stack. But this action is not made in this
* class, only in the \Hoa\Console\GetOption class, because this class
* does not have the options profile. We got the transferSwitchToInput()
* method, that is called in the GetOption class.
* So :
* $ cmd -x input the input is the -x value ;
* $ cmd -x -- input the input is a real input, not a value ;
* $ cmd -x value input -x is set to value, and the input is a real
* input ;
* $ cmd -x value -- input equivalent to -x value input ;
* $ … -a b i -c d ii -a is set to b, -c to d, and we got two
* inputs : i and ii.
*
* Warning : if the command was reconstitued from the $_SERVER variable, all
* these cases are not sure to work, because the command was already
* interpreted/parsed by an other parser (Shell, DOS etc.), and maybe they
* remove some character, or some particular case. But if we give the
* command manually — i.e. without any reconstitution —, all these cases
* will work :).
*
* @param string $command Command to parse.
* @return void
*/
public function parse($command)
{
unset($this->_parsed);
$this->_parsed = [
'input' => [],
'switch' => []
];
/**
* Here we go …
*
* #
* (?:
* (?<b>--?[^=\s]+)
* (?:
* (?:(=)|(\s))
* (?<!\\\)(?:("|\')|)
* (?<s>(?(3)[^-]|).*?)
* (?(4)
* (?<!\\\)\4
* |
* (?(2)
* (?<!\\\)\s
* |
* (?:(?:(?<!\\\)\s)|$)
* )
* )
* )?
* )
* |
* (?:
* (?<!\\\)(?:("|\')|)
* (?<i>.*?)
* (?(6)
* (?<!\\\)\6
* |
* (?:(?:(?<!\\\)\s)|$)
* )
* )
* #xSsm
*
* Nice isn't it :-D ?
*
* Note : this regular expression likes to capture empty array (near
* <i>), why?
*/
$regex = '#(?:(?<b>--?[^=\s]+)(?:(?:(=)|(\s))(?<!\\\)(?:("|\')|)(?<s>(?(3)[^-]|).*?)(?(4)(?<!\\\)\4|(?(2)(?<!\\\)\s|(?:(?:(?<!\\\)\s)|$))))?)|(?:(?<!\\\)(?:("|\')|)(?<i>.*?)(?(6)(?<!\\\)\6|(?:(?:(?<!\\\)\s)|$)))#Ssm';
preg_match_all($regex, $command, $matches, PREG_SET_ORDER);
for ($i = 0, $max = count($matches); $i < $max; ++$i) {
$match = $matches[$i];
if (isset($match['i']) &&
('0' === $match['i'] || !empty($match['i']))) {
$this->addInput($match);
} elseif (!isset($match['i']) && !isset($match['s'])) {
if (isset($matches[$i + 1])) {
$nextMatch = $matches[$i + 1];
if (!empty($nextMatch['i']) &&
'=' === $nextMatch['i'][0]) {
++$i;
$match[2] = '=';
$match[3] =
$match[4] = null;
$match['s'] =
$match[5] = substr($nextMatch[7], 1);
$this->addValuedSwitch($match);
continue;
}
}
$this->addBoolSwitch($match);
} elseif (!isset($match['i']) && isset($match['s'])) {
$this->addValuedSwitch($match);
}
}
return;
}
/**
* Add an input.
*
* @param array $input Intput.
* @return void
*/
protected function addInput(array $input)
{
$handle = $input['i'];
if (!empty($input[6])) {
$handle = str_replace('\\' . $input[6], $input[6], $handle);
} else {
$handle = str_replace('\\ ', ' ', $handle);
}
$this->_parsed['input'][] = $handle;
return;
}
/**
* Add a boolean switch.
*
* @param array $switch Switch.
* @return void
*/
protected function addBoolSwitch(array $switch)
{
$this->addSwitch($switch['b'], true);
return;
}
/**
* Add a valued switch.
*
* @param array $switch Switch.
* @return void
*/
protected function addValuedSwitch(array $switch)
{
$this->addSwitch($switch['b'], $switch['s'], $switch[4]);
return;
}
/**
* Add a switch.
*
* @param string $name Switch name.
* @param string $value Switch value.
* @param string $escape Character to escape.
* @return void
*/
protected function addSwitch($name, $value, $escape = null)
{
if (substr($name, 0, 2) == '--') {
return $this->addSwitch(substr($name, 2), $value, $escape);
}
if (substr($name, 0, 1) == '-') {
if (true === $this->getLongOnly()) {
return $this->addSwitch('-' . $name, $value, $escape);
}
foreach (str_split(substr($name, 1)) as $foo => $switch) {
$this->addSwitch($switch, $value, $escape);
}
return;
}
if (null !== $escape) {
$escape = '' == $escape ? ' ' : $escape;
if (is_string($value)) {
$value = str_replace('\\' . $escape, $escape, $value);
}
} elseif (is_string($value)) {
$value = str_replace('\\ ', ' ', $value);
}
if (isset($this->_parsed['switch'][$name])) {
if (is_bool($this->_parsed['switch'][$name])) {
$value = !$this->_parsed['switch'][$name];
} else {
$value = [$this->_parsed['switch'][$name], $value];
}
}
if (empty($name)) {
return $this->addInput([6 => null, 'i' => $value]);
}
$this->_parsed['switch'][$name] = $value;
return;
}
/**
* Transfer a switch value in the input stack.
*
* @param string $name The switch name.
* @param string $value The switch value.
* @return void
*/
public function transferSwitchToInput($name, &$value)
{
if (!isset($this->_parsed['switch'][$name])) {
return;
}
$this->_parsed['input'][] = $this->_parsed['switch'][$name];
$value = true;
unset($this->_parsed['switch'][$name]);
return;
}
/**
* Get all inputs.
*
* @return array
*/
public function getInputs()
{
return $this->_parsed['input'];
}
/**
* Distribute inputs in variable (like the list() function, but without
* error).
*
* @param string $a First input.
* @param string $b Second input.
* @param string $c Third input.
* @param ... ... ...
* @param string $z 26th input.
* @return void
*/
public function listInputs(
&$a,
&$b = null,
&$c = null,
&$d = null,
&$e = null,
&$f = null,
&$g = null,
&$h = null,
&$i = null,
&$j = null,
&$k = null,
&$l = null,
&$m = null,
&$n = null,
&$o = null,
&$p = null,
&$q = null,
&$r = null,
&$s = null,
&$t = null,
&$u = null,
&$v = null,
&$w = null,
&$x = null,
&$y = null,
&$z = null
) {
$inputs = $this->getInputs();
$i = 'a';
$ii = -1;
while (isset($inputs[++$ii]) && $i <= 'z') {
${$i++} = $inputs[$ii];
}
return;
}
/**
* Get all switches.
*
* @return array
*/
public function getSwitches()
{
return $this->_parsed['switch'];
}
/**
* Parse a special value, i.e. with comma and intervals.
*
* @param string $value The value to parse.
* @param array $keywords Value of keywords.
* @return array
* @throws \Hoa\Console\Exception
* @todo Could be ameliorate with a ":" explode, and some eval.
* Check if operands are integer.
*/
public function parseSpecialValue($value, array $keywords = [])
{
$out = [];
foreach (explode(',', $value) as $key => $subvalue) {
$subvalue = str_replace(
array_keys($keywords),
array_values($keywords),
$subvalue
);
if (0 !== preg_match('#^(-?[0-9]+):(-?[0-9]+)$#', $subvalue, $matches)) {
if (0 > $matches[1] && 0 > $matches[2]) {
throw new Exception(
'Cannot give two negative numbers, given %s.',
0,
$subvalue
);
}
array_shift($matches);
$max = max($matches);
$min = min($matches);
if (0 > $max || 0 > $min) {
if (0 > $max - $min) {
throw new Exception(
'The difference between operands must be ' .
'positive.',
1
);
}
$min = $max + $min;
}
$out = array_merge(range($min, $max), $out);
} else {
$out[] = $subvalue;
}
}
return $out;
}
/**
* Set the long-only parameter.
*
* @param bool $longonly The long-only value.
* @return bool
*/
public function setLongOnly($longonly = false)
{
$old = $this->_longonly;
$this->_longonly = $longonly;
return $old;
}
/**
* Get the long-only value.
*
* @return bool
*/
public function getLongOnly()
{
return $this->_longonly;
}
}