File: /var/www/vhost/disk-apps/demo-telemedicina.teky.com.co/vendor/berkayk/onesignal-laravel/README.md
# OneSignal Push Notifications for Laravel
[](https://packagist.org/packages/berkayk/onesignal-laravel)
[](https://packagist.org/packages/berkayk/onesignal-laravel)
[](https://packagist.org/packages/berkayk/onesignal-laravel)
## Introduction
This is a simple OneSignal wrapper library for Laravel. It simplifies the basic
notification flow with the defined methods. You can send a message to all users
or you can notify a single user. Before you start installing this service,
please complete your OneSignal setup at https://onesignal.com and finish all
the steps that is necessary to obtain an application id and REST API Keys.
## Installation
First, you'll need to require the package with Composer:
```sh
composer require berkayk/onesignal-laravel
```
Afterwards, run `composer update` from your command line.
**You only need to do the following if your Laravel version is below 5.5**:
Then, update `config/app.php` by adding an entry for the service provider.
```php
'providers' => [
// ...
Berkayk\OneSignal\OneSignalServiceProvider::class
];
```
Then, register class alias by adding an entry in aliases section
```php
'aliases' => [
// ...
'OneSignal' => Berkayk\OneSignal\OneSignalFacade::class
];
```
Finally, from the command line again, run
```
php artisan vendor:publish --provider="Berkayk\OneSignal\OneSignalServiceProvider" --tag="config"
```
to publish the default configuration file.
This will publish a configuration file named `onesignal.php` which includes
your OneSignal authorization keys.
> **Note:** If the previous command does not publish the config file successfully,
> please check the steps involving *providers* and *aliases* in the `config/app.php` file.
## Configuration
You need to fill in your OneSignal *App ID* and *REST API Key* inside your
.env file like this:
```
ONESIGNAL_APP_ID=xxxxxxxxxxxxxxxxxxxx
ONESIGNAL_REST_API_KEY=xxxxxxxxxxxxxxxxxx
```
You can control timeout of the Guzzle client used by OneSignalClient by adding following into your .env file
```
ONESIGNAL_GUZZLE_CLIENT_TIMEOUT=integer_value
```
This param is useful when you are planning to send push notification via [Laravel queues](https://divinglaravel.com/always-set-a-timeout-for-guzzle-requests-inside-a-queued-job)
## Usage
### Sending a Notification To All Users
You can easily send a message to all registered users with the command
```php
OneSignal::sendNotificationToAll(
"Some Message",
$url = null,
$data = null,
$buttons = null,
$schedule = null
);
```
`$url` , `$data` , `$buttons` and `$schedule` fields are exceptional. If you
provide a `$url` parameter, users will be redirecting to that url.
### Sending a Notification based on Tags/Filters
You can send a message based on a set of tags with the command
##### Example 1:
```php
OneSignal::sendNotificationUsingTags(
"Some Message",
array(
["field" => "tag", "key" => "email", "relation" => "=", "value" => "email21@example.com"],
["field" => "tag", "key" => "email", "relation" => "=", "value" => "email1@example.com"],
...
),
$url = null,
$data = null,
$buttons = null,
$schedule = null
);
```
##### Example 2:
```php
OneSignal::sendNotificationUsingTags(
"Some Message",
array(
["field" => "tag", "key" => "session_count", "relation" => ">", "value" => '2'],
["field" => "tag", "key" => "first_session", "relation" => ">", "value" => '2000'],
),
$url = null,
$data = null,
$buttons = null,
$schedule = null
);
```
### Sending a Notification To A Specific User
After storing a user's tokens in a table, you can simply send a message with
```php
OneSignal::sendNotificationToUser(
"Some Message",
$userId,
$url = null,
$data = null,
$buttons = null,
$schedule = null
);
```
`$userId` is the user's unique id where he/she is registered for notifications.
Read https://documentation.onesignal.com/docs/add-user-data-tags for additional details.
`$url` , `$data` , `$buttons` and `$schedule` fields are exceptional. If you provide
a `$url` parameter, users will be redirecting to that url.
### Sending a Notification To A Specific external User (custom user id added by user)
After storing a user's tokens in a table, you can simply send a message with
```php
OneSignal::sendNotificationToExternalUser(
"Some Message",
$userId,
$url = null,
$data = null,
$buttons = null,
$schedule = null
);
```
`$userId` is the user's unique external id (custom id) added by the user where he/she is registered for notifications.
Read https://documentation.onesignal.com/docs/add-user-data-tags for additional details.
`$url` , `$data` , `$buttons` and `$schedule` fields are exceptional. If you provide
a `$url` parameter, users will be redirecting to that url.
### Sending a Notification To Segment
You can simply send a notification to a specific segment with
```php
OneSignal::sendNotificationToSegment(
"Some Message",
$segment,
$url = null,
$data = null,
$buttons = null,
$schedule = null
);
```
`$url` , `$data` , `$buttons` and `$schedule` fields are exceptional. If you
provide a `$url` parameter, users will be redirecting to that url.
### Sending a Custom Notification
You can send a custom message with
```php
OneSignal::sendNotificationCustom($parameters);
```
### Sending a async Custom Notification
You can send a async custom message with
```php
OneSignal::async()->sendNotificationCustom($parameters);
```
Please refer to https://documentation.onesignal.com/reference for all customizable parameters.
## Examples
Some people found examples confusing, so I am going to provide some detailed examples that I use in my applications. These examples will probably guide you on customizing your notifications. For custom parameters, please refer to https://documentation.onesignal.com/reference/create-notification.
### 1) Sending a message to a segment with custom icon and custom icon color
You need to customize `android_accent_color` and `small_icon` values before sending your notifications. These are `parameters` that you need to specify while sending your notifications.
```php
use OneSignal;
$params = [];
$params['android_accent_color'] = 'FFCCAA72'; // argb color value
$params['small_icon'] = 'ic_stat_distriqt_default'; // icon res name specified in your app
$message = "Test message to send";
$segment = "Testers";
OneSignal::addParams($params)->sendNotificationToSegment(
$message,
$segment
);
// or to all users
OneSignal::addParams($params)->sendNotificationToAll($message);
```
### 2. Sending a message with high priority
This time, we will specify parameters one by one.
```php
use OneSignal;
$message = "Test message to send";
$segment = "Testers";
OneSignal::setParam('priority', 10)->sendNotificationToSegment(
$message,
$segment
);
// You can chain as many parameters as you wish
OneSignal::setParam('priority', 10)->setParam('small_icon', 'ic_stat_onesignal_default')->setParam('led_color', 'FFAACCAA')->sendNotificationToAll($message);
```
### 3. Sending a message with custom heading and subtitle
```php
use OneSignal;
OneSignal::sendNotificationToSegment(
"Test message with custom heading and subtitle",
"Testers",
null, null, null, null,
"Custom Heading",
"Custom subtitle"
);
```
### 4. Sending a delayed message to a specific user with many custom parameters
```php
use OneSignal;
$userId = "3232331-1722-4fee-943d-23123asda123";
$params = [];
$params['include_player_ids'] = [$userId];
$contents = [
"en" => "Some English Message",
"tr" => "Some Turkish Message"
];
$params['contents'] = $contents;
$params['delayed_option'] = "timezone"; // Will deliver on user's timezone
$params['delivery_time_of_day'] = "2:30PM"; // Delivery time
OneSignal::sendNotificationCustom($params);
```